Asus NCL-DS Network Card User Manual


 
ASUS NCL-DSASUS NCL-DS
ASUS NCL-DSASUS NCL-DS
ASUS NCL-DS
2-132-13
2-132-13
2-13
2.4 System memory
2.4.12.4.1
2.4.12.4.1
2.4.1
OverviewOverview
OverviewOverview
Overview
The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline
Memory Modules (DIMM) sockets.
A DDR2 module has the same physical dimensions as a DDR DIMM but has a
240-pin footprint. DDR2 DIMMs are notched to match the break on the
socket and ensure correct installation.
The figure illustrates the location of the DDR2 DIMM sockets:
2.4.22.4.2
2.4.22.4.2
2.4.2
Memory configurationsMemory configurations
Memory configurationsMemory configurations
Memory configurations
You may install 256 MB, 512 MB and 1 GB registered ECC DDR2 DIMMs into
the DIMM sockets.
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Refer to the DDR2 Qualified Vendors List at
the ASUS web site.
Due to chipset resource allocation, the system may detect less than
8 GB system memory when you installed eight 1 GB DDR2 memory
modules.
This motherboard does not support memory modules made up of
128 Mb chips or double-rank x16 memory modules.
If you are installing only one memory module, install into the blue
socket labeled DIMM_B4. Installing into any other socket would not
work.
®
NCL-DS
DIMM_A1
DIMM_B1
NCL-DS 240-pin DDR2 DIMM sockets
DIMM_A2
DIMM_B2
DIMM_A3
DIMM_B3
DIMM_A4
DIMM_B4
112 Pins128 Pins