Asus P2B-D2 Computer Hardware User Manual


 
ASUS P2B-D2 User’s Manual 67
A. Video Driver
(Windows NT 4.0)
A. Video Driver
Windows NT 4.0 Video Driver Installation
1. Boot Windows NT in standard VGA mode (recommended).
2. Run Windows NT Display program located in the Control Panel, under Set-
tings in the Start menu. Alternatively, position the cursor on the background of
the desktop, click the right mouse button, then select Properties from the popup
menu.
3. Select the Settings page.
4. Select Display Type.
5. Select Change from the display options.
6. Select Have Disk.
7. Windows NT will prompt you for the correct path, enter the path of driver in CD-
ROM such as D:\VGA\NT40 (assuming your CD-ROM drive is letter D).
8. A list of ASUS S3 series video adapters will be displayed. Select the one you are
using, then click OK.
9. Windows NT will once again prompt for confirmation. All appropriate files are
then copied to the hard disk.
10. Select Apply in Control Panel. Restart Windows NT. Windows NT will start
up using the S3 drivers.
11. Windows NT will boot into a default mode and start the Display applet allowing
for mode selection.