Filter
Top Products
20 ASUS P2B-D/P2B-DS User’s Manual
III. INSTALLATION
CPU
III. INSTALLATION
Installing the Pentium II Processor
1. Connect the Heat Sensor Cable to JP4/JP5 (optional): If you purchased the
specially designed fan and thermal monitor heatsinks, you may connect the heat
sensor cables to the motherboard’s CPU heat sensor connectors (JP4/JP5) now.
NOTE: If you are installing only one processor, you may use JP5 to connect a
heat sensor cable to monitor the power supply temperature to make sure that it is
operating at a safe heat level. This feature is available only with the hardware
monitor installed.
P2B-D/DS CPU Heat Sensor Connectors
1
1
R
JP4
JP5
Heat Sensor Connector for CPU 1
Heat Sensor Connector for CPU 2
PWR_FA
JP4
JP5
Intel
440BX
AGPset
Single Edge Contact Slot for CPU 1
Single Edge Contact Slot for CPU 2
B
Rib
Rib
NOTE: Insert the
screws into the
encircled areas.
2. Insert the Attach Mount Screws: Insert the screws through the motherboard’s
underside at the location indicated. Press the screws gently but firmly until it is
fully inserted. Do not rock the screws side to side, instead press the screws straight
into the holes.