Filter
Top Products
22 ASUS P2B-D/P2B-DS User’s Manual
III. INSTALLATION
CPU
III. INSTALLATION
5. Insert the SEC Cartridge: Push the SEC cartridge’s two locks inward until
you hear a click (the preceding picture shows the locks in the outward position
and inward in the picture below). With the heatsink facing the motherboard’s
chipset, press the cartridge gently but firmly until it is fully inserted. (NOTE:
The procedures shown here are for installing the AAVID heatsink with fan.)
IMPORTANT: If you are installing only one processor, you must install it in the SEC
slot for CPU 1 (slot closest to the external connectors). Then terminate the empty slot
with the ASUS C-P2T PC100 CPU termination card to maintain signal strength.
IMPORTANT: Use only the ASUS C-P2T PC100 CPU termination card (Rev. 1.02
or later) to terminate the empty slot.
6. Secure the SEC Cartridge: Secure the SEC cartridge in place by pushing the
SEC cartridge locks outward so that the lock shows through the retention
mechanism’s lock holes.
lock holes
Push lock inward