Filter
Top Products
14 ASUS P2L-VM/P2E-VM User’s Manual
III. INSTALLATION
Jumpers
III. INSTALLATION
1. Jumpers
1. VGA Interrupt Selection (INT_EN) and 2. VGA Setting (VGAEN)
The INT_EN jumper allows you to set the VGA interrupt method. The default
disables the chipset’s internal interrupt routing. Some TV-Tuner or MPEG cards
may require that the interrupt be assigned by the onboard chipset, in which case
enable INT_EN. The VGAEN jumper allows you to enable or disable the onboard
VGA. Disable the onboard VGA if you are using a VGA card on the expansion slot.
R
P2L-VM/P2E-VM VGA Settings
Disable
(Default)
INT_EN
INT_EN
Enable
1
2
3
1
2
3
Enable
(Default)
VGAEN
VGAEN
Disable
1
2
3
1
2
3
WARNING! Computer motherboards, baseboards and components, such as SCSI
cards, contain very delicate Integrated Circuit (IC) chips. To protect them against
damage from static electricity, you should follow some precautions whenever you
work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a
metal object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or
connectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with
the component whenever the components are separated from the system.
Installation Steps
Before using your computer, you must complete the following steps:
1. Set Jumpers on the Motherboard
2. Install System Memory Modules
3. Install the Central Processing Unit (CPU)
4. Install Expansion Cards
5. Connect Ribbon Cables, Cabinet Wires, and Power Supply
6. Setup the BIOS Software
Setting INT_EN
Enable [2-3]
Disable [1-2] (def)
Setting VGAEN
Enable [1-2] (def)
Disable [2-3]