Filter
Top Products
ASUS P3B-1394 User’s Manual 23
3. HARDWARE SETUP
CPU
3. H/W SETUP
2. Attach the Heatsink
NOTE: If provided, you should follow the heatsink attachment instructions
that came with your heatsink or processor. The following steps are provided
only as a general guide and may not reflect those for your heatsink.
The URM is now ready for the installation
of your processor.
3.6.3 Installing the Processor
1. Unlock the URM’s Folding Support Arms:
The folding support arms of the URM are
locked when shipped.
Using the SECC fan with the Pentium
®
II
Push the two lock arms in one direction to
clamp the heatsink onto the processor and the
other direction to release.
Using the SECC2 fan with the Pentium
®
III
Insert the four heatsink’s pins through the
holes of the SECC2. Place the metal clip on
the ends of the pins and slide until it locks
into place.
Unlocked Folding
Support Arms
Locked Folding
Support Arms
To unlock the support arms, simply flip them
up to an upright position.
Lock Arm
Lock Arm
Four Pins and metal clip
NOTE: The SEPP heatsink and fan (for Intel Celeron processors) is similar to
the SECC2 heatsink and fan except that the clamping design is different.