Filter
Top Products
34 ASUS P3B-1394 User’s Manual
3. HARDWARE SETUP
Connectors
3. H/W SETUP
12) Wake-On-LAN Connector (3-pin WOL_CON)
The WOL_CON connector powers up the system when a wake-up packet or
signal is received from the network through the ASUS PCI-L101 LAN card.
IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see
4.6 Power Management Setup) and that your system has an ATX power supply
with at least 720mA +5V standby power.
P3B-1394
®
P3B-1394 Wake-On-LAN Connector
+5 VSB
PME
Ground
WOL_CON
13) Wake-On-Ring Connector (2-pin WOR)
This connector connects to an internal modem card with a Wake-On-Ring out-
put. The connector powers up the system when a ringup packet or signal is re-
ceived through the internal modem card. NOTE: For external modems, Wake-
On-Ring is detected through the COM port.
IMPORTANT: This feature requires that PWR Up On Modem Act is set to
Enabled (see 4.6 Power Management Setup).
P3B-1394
®
P3B-1394 Wake-On-Ring Connector
WOR
Pin 1 Ground
Pin 2 PIXRI#