Filter
Top Products
1-321-32
1-321-32
1-32
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
•
System warning speaker (4-pin SPEAKER)System warning speaker (4-pin SPEAKER)
System warning speaker (4-pin SPEAKER)System warning speaker (4-pin SPEAKER)
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
•
Hard disk drive activity (2-pin IDE_LED)Hard disk drive activity (2-pin IDE_LED)
Hard disk drive activity (2-pin IDE_LED)Hard disk drive activity (2-pin IDE_LED)
Hard disk drive activity (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
•
Power/Soft-off button (2-pin PWRSW)Power/Soft-off button (2-pin PWRSW)
Power/Soft-off button (2-pin PWRSW)Power/Soft-off button (2-pin PWRSW)
Power/Soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-OFF
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
•
Reset button (2-pin RESET)Reset button (2-pin RESET)
Reset button (2-pin RESET)Reset button (2-pin RESET)
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.