Filter
Top Products
2-242-24
2-242-24
2-24
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
2.4.42.4.4
2.4.42.4.4
2.4.4
Onboard Devices ConfigurationOnboard Devices Configuration
Onboard Devices ConfigurationOnboard Devices Configuration
Onboard Devices Configuration
Onboard AC’97 Audio [Auto]
Onboard LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
Onboard Game/MIDI Port [Disabled]
Onboard AC’97 Audio [Auto]Onboard AC’97 Audio [Auto]
Onboard AC’97 Audio [Auto]Onboard AC’97 Audio [Auto]
Onboard AC’97 Audio [Auto]
When set to Auto, the BIOS detects whether you are using any audio
device. If an audio device is detected, the onboard audio controller is
enable; if no audio device is detected, the controller is disabled.
Configuration options: [Auto] [Disabled]
OnBoard LAN [Enabled]OnBoard LAN [Enabled]
OnBoard LAN [Enabled]OnBoard LAN [Enabled]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard PCI Express Gigabit LAN
controller. Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN
controller. This item appears only when the Onboard LAN item is set
to Enabled. Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]Serial Port1 Address [3F8/IRQ4]
Serial Port1 Address [3F8/IRQ4]Serial Port1 Address [3F8/IRQ4]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]Parallel Port Address [378]
Parallel Port Address [378]Parallel Port Address [378]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Spread Spectrum [Enabled]Spread Spectrum [Enabled]
Spread Spectrum [Enabled]Spread Spectrum [Enabled]
Spread Spectrum [Enabled]
Enables or disables the clock generator spread spectrum.
Configuration options: [Disabled] [Enabled]
MPS Revision [1.4]MPS Revision [1.4]
MPS Revision [1.4]MPS Revision [1.4]
MPS Revision [1.4]
Sets the MPS revision version. Configuration options: [1.1] [1.4]