Asus P5VD2-MX Personal Computer User Manual


  Open as PDF
of 108
 
ASUS P5VD2-MX/P5V-VM DH 3-9
Create Array
From the VIA RAID BIOS utility main menu, select Create Array then
press <Enter>. The main menu items on the upper-left corner of the screen
are replaced with create array menu options.
RAID 0 for performance
1. From the create array menu, select Array Mode, then press <Enter>.
The supported RAID congurations appear on a pop-up menu.
2. Select RAID 0 for performance then press <Enter>.
From this point, you may choose to auto-congure the RAID array by
selecting Auto Setup for Performance or manually congure the RAID
array for stripped sets. If you want to auto-congure, proceed to the
next step, otherwise, skip to step 5.
3. Select Auto Setup for Performance and press <Enter>. The following
conrmation message appears.
Auto create array will destroy all
data on disks, Continue? (Y/N)
Auto Setup For Data Security
Array Mode RAID 1 (Mirroring)
Select Disk Drives
Start Create Process
VIA Tech. VT8251 Series SATA RAID BIOS Ver 1.xx
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/Disk Status
↑
,
↓
: Move to next item
Enter:Conrmtheselection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX
Serial_Ch1 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX
RAID 1 for data protection
RAID SPAN for capacity
RAID 0 for performance
 previous next