Filter
Top Products
ASUS P/I-AP55TV User's Manual 85
Diagnostics
All installed graphics modes in the mach64 accelerator can be viewed and tested,
by running the INSTALL program from the DOS prompt, or by running a diagnos-
tics program called M64DIAG.EXE. Do not run it in a windowed or full-screen
DOS box.
In the INSTALL program, select Test Graphics Adapter from the Diagnostics...
option of the Main Menu. The Test Graphics Adapter menu has the following op-
tions:
• VGA Tests ...
• Accelerator Tests ...
Any time you suspect there is a problem, especially during installation, run the
above tests. The information provided in this appendix will enable you to solve
most problems.
Troubleshooting
Because a typical computer system consists of many different parts, difficulties
may arise from a combination of items, from software or hardware installation, to
monitor compatibility. Listed below are several checks you can make to help deter-
mine what the problem is.
System Lockup
• If you are using a memory manager such as QEMM or 386MAX you need to
modify the command line in the CONFIG.SYS file so that the address of the
graphics device video BIOS, C000 - C7FF, is excluded. For example, add
"EXCLUDE = C000 - C7FF" to the command line.
• Remove all unnecessary boards.
• Disable shadow RAM.
• Ensure that the board is seated correctly and that the device has been installed
using the proper utilities.
• Try the device in a different system and reset to factory defaults using the
INSTALL program. If the device works in another system, the problem is
likely due to incorrect configuration.
A. Troubleshooting
(Diagnostics)
A. Troubleshooting