Filter
Top Products
P/I-P6NP5 User's Manual
5
III. INSTALLATION
Jumpers
1) JP10 p. 7 Multi-I/O Selection (Enable/Disable)
2) JP13 p. 7 Flash ROM Boot Block Program (Enable/Disable)
3) JP12 p. 8 CMOS RAM (Operation/Clear CMOS Data)
4) JP15, 16, 17, 18 p. 8 Voltage Regulator Output Selection
5) JP2, 3 p. 10 CPU External Clock (BUS) Frequency Selection
6) JP4, 5, 6, 7 p. 10 CPU:BUS Frequency Ratio
Expansion Slots
1) SIMM Slots p. 12 DRAM Memory Expansion slots
2) ZIF Socket 8 p. 15 Socket for Central Processing Unit (CPU)
3) ISA Slots 1, 2, 3 p. 16 16-bit ISA Bus Expansion slots
4) PCI Slots 1, 2, 3, 4 p. 16 32-bit PCI Bus Expansion slots
5) PCI 5 / MediaBus p. 18 32-bit PCI Bus Slot and MediaBus
Connectors
1) Keyboard p. 19 Keyboard connector (5-pin Female)
2) PS/2 Mouse p. 19 PS/2 Mouse connector (6-pin Block)
3) Parallel Port p. 20 Parallel Port connector (26-pin Block)
4) Serial Port p. 20 Serial Port COM1 & COM2 (10-pin Blocks)
5) Floppy Drive p. 21 Floppy Drive connector (34-pin Block)
6) Power Input p. 21 Motherboard Power connector (12-pin Block)
7) Primary/Second. IDE p. 22 Primary/Secondary IDE connectors (40-pin Blocks)
8) Turbo/Power (CON1) p. 22 Turbo LED/Power LED (2-pins)
9) SMI Switch (CON1) p. 22 SMI Switch lead (2-pins)
10) Reset Switch (CON1) p. 23 Reset Switch lead (2-pins)
11) Key Lock (CON1) p. 23 Keyboard Lock Switch lead (5-pins)
12) Speaker (CON1) p. 23 Speaker connector (4-pins)
13) JP11 p. 23 IDE LED activity light
14) JP1 p. 24 CPU 12V Cooling Fan connector
15) IR p. 24 Infrared Port Module connector
(Map of Board)
III. INSTALLATION