Filter
Top Products
P/I-P6NP5 User's Manual
20
3. Parallel Printer Connector (26 Pin Block)
Connection for the included parallel port ribbon cable with mounting
bracket. Connect the ribbon cable to this connection and mount the
bracket to the case on an open slot. It will then be available for a
parallel printer cable. Note: Serial printers must be connected to the
serial port. You can enable the parallel port and choose the IRQ through
BIOS Setup on page 37 "Onboard Parallel Port." (Pin 26 is removed
to prevent inserting in the wrong orientation when using ribbon
cables with pin 26 plugged).