Filter
Top Products
P/I-P6NP5 User's Manual
19
III. INSTALLATION
5. External Connectors
IMPORTANT: Ribbon cables should always be connected with the red
stripe on the Pin 1 side of the connector. The four corners of the
connectors are labeled on the motherboard. Pin 1 is the side closest to
the power connector on hard drives and floppy drives. IDE ribbon
cable must be less than 18in. (46cm), with the second drive connector
no more than 6in. (15cm) from the first connector.
1. Keyboard Connector (5-pin female)
This connection is for a standard IBM-compatible keyboard. May also
be known as a 101 enhanced keyboard.
Connector Plug from Keyboard
Keyboard Connector (5-pin female)