Filter
Top Products
P/I-P6NP5 User's Manual
13
DRAM Memory Installation Procedures:
1. The SIMM memory modules will only fit in one orientation as shown
because of a "Plastic Safety Tab" on one end of the SIMM sockets
which requires the "Notched End" of the SIMM memory modules.
72 Pin SIMM DRAM Sockets & Module
1234
Notched End
Bank 0 Bank 1
2. Press the memory module firmly into place starting from a 45 degree
angle making sure that all the contacts are aligned with the socket.
3. With your finger tips, rock the memory module into a vertical position
so that it clicks into place.
Metal Clip
Plastic Safety Tab (This Side Only)
Mounting Hole
72 Pin DRAM in SIMM Socket
4. The plastic guides should go through the two "Mounting Holes" on the
sides and the "Metal Clips" should snap on the other side.
5. To release the memory module, squeeze both "Metal Clips" outwards
and rock the module out of the "Metal Clips".