Filter
Top Products
P/I-P6NP5 User's Manual
24
III. INSTALLATION
(Connectors)
III. INSTALLATION
14. CPU cooling fan connector (FAN)
This connector supports a CPU cooling fan of 500mAMP (6WATT) or
less. Orientate the fan so that the heat sink fins allow airflow to go
across the onboard heat sink(s) instead of the expansion slots.
Depending on the fan manufacturer, the wiring and plug may be
different. The red wire should be positive, while the black should be
ground. Connect the fan's plug to the board taking into consideration
the polarity of the this connector.
WARNING: The CPU and/or motherboard will overheat if there is
no airflow across the CPU and onboard heatsinks. Damage may
occur to the motherboard and/or the CPU fan if these pins are
incorrectly used.