Filter
Top Products
ASUS PP-DLW motherboard user guide
5-25
5.8 SCO UnixWare Server
5.8.1 Intel
®
82540EM LAN Driver Installation
SCO UnixWare 7.1.1 system can correctly recognize Intel 82540EM
network controller during installation. User doesn’t need to load or modify
the network driver for the onboard LAN device.
You can find the Intel 82540EM Network driver from support CD at:
\Drivers\Lan\UNIX\UW7DDI8
It is not necessary, nor recommended, to remove previous versions of this
package from the system before installing this updated version. To install
this package, you may use the
scoadmin Application Installer from the
desktop, or as a root login with pkgadd command.
1. Copy the
eeE8.pkg file into any directory on the UnixWare system,
such as in the /tmp directory.
2. Make sure no other users are logged on and all user applications are
closed.
3. If there is an older version of the
eeE driver on the system, first run
‘
netcfg’ and remove any configured NICs. Exit ‘netcfg’. Remove the
old driver by typing ‘pkgrm eeE’. (You can find the driver version by
typing ‘pkginfo -l eeE’).
4. Install the new driver using ‘pkgadd’. For example:
# pkgadd -d /tmp/eeE8.pkg
5. Run ‘netcfg’ to add and configure the NICs.
6. Reboot the system.
If you require Hot Plug PCI capabilities, the DDI 8 eeE8 driver must be
used. The DDI 8 driver is supported on UnixWare 7.1.0 and later
versions. For more information about Hot Plug PCI capabilities please
refer to SCO UnixWare 7 documentation.