Filter
Top Products
ASUS PP-DLW motherboard user guide
4-11
OnBoard Floppy Controller [Enabled]
Allows you to enable or disable the floppy disk controller. Configuration
options: [Disabled] [ Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options:
[Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address. Configuration options:
[Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Mode [Normal]
Allows you to select the mode for Serial Port2. When the item Serial
Port 2 Address is set to Disabled, this item does not appear.
Configuration options: [Normal] [Sharp-IR] [SIR] [Consumer]
IR Duplex Mode
Allows selection of either Full Duplex or Half Duplex for Serial Port2 in
IR mode. This item appears only when Serial Port2 Mode is set to
either Sharp-IR, SIR, or Consumer.
IR Receiver Pin
Allows selection of either Receiver pin or Transmit pin for Serial Port2
in IR mode. This item appears only when Serial Port2 Mode is set to
either Sharp-IR, SIR, or Consumer.
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses. Configuration
options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode. When the item Parallel
Port Address is set to 278, the Parallel Port Mode options are only
Normal and EPP. Configuration options: [Normal] [Bi-directional] [EPP]
[ECP]
EPP Version [1.9]
Allows selection of the Parallel Port EPP version. This item appears
only when the Parallel Port Mode is set to EPP. Configuration options:
[1.9] [1.7]