Filter
Top Products
4-28
Chapter 4: BIOS Setup
4.9 Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM). Select an item then press Enter to display the
configuration options.
4.9.1 Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM)
feature. Configuration options: [Disbaled] [Enabled]
4.9.2 Video Power Down Mode [Suspend]
Powers down video in suspend mode or standby mode. This item appears
only when the Power Management/APM item is set to Enabled.
Configuration options: [Disabled] [Standby] [Suspend]
4.9.3 Hard Disk Power Down Mode [Suspend]
Powers down hard disk in suspend mode or standby mode. This item
appears only when the Power Management/APM item is set to Enabled.
Configuration options: [Disabled] [Standby] [Suspend]
4.9.4 Standby Time Out [Disabled]
When set to any one of the time options, the system goes into standby at
the specified time. When set to Disabled, the system does not go into
standby. This item appears only when the Power Management/APM item
is set to Enabled. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min]
[8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min]