Filter
Top Products
1-8
Chapter 1: Product introduction
ATX power connector. This 24/20-pin connector is for an ATX
power supply.
604-pin CPU sockets. A 604-pin surface mount, Zero Insertion
Force (ZIF) socket for the Intel
®
Xeon™ processor with 512KB L2
cache and a 533/400MHz system bus that allows up to 4.2GBps or
3.2GBps data transfer rates. These sockets support Intel Xeon
CPUs with Hyper-Threading Technology feature.
Intel E7505 MCH (Placer) . The E7505 Memory Controller Hub
(MCH) is the host bridge of the Placer chipset which is designed for
the next generation workstation or high-end desktop platforms. The
MCH supports the Intel
®
Xeon™ processor in dual-processor or uni-
processor mode at peak bandwidths of 4.2GBps (533MHz) or
3.2GBps (400MHz). The MCH works with the I/O Controller Hub
(ICH4) for the I/O subsystem, provides AGP 8x/4x interface
(compliant to AGP 3.0 specification), and supports dual-channel
DDR SDRAM interface for up to 8GB system memory.
8-pin 12V SSI power connector. This 8-pin connector is for an
ATX power supply.
DDR DIMM sockets. These four 184-pin DIMM sockets support up
to 8GB system memory using unbuffered/registered ECC/non-ECC
PC2100/1600 DDR DIMMs.
AGP Pro 8X slot. This Accelerated Graphics (AGP) Pro slot
supports 1.5V AGP 8X mode graphic cards to deliver up to 2.1GB/s
bandwidth.
Intel
®
P64H2 PCI-X hub. The P64H2 is PCI/PCI-X 64-bit Hub 2
that provides high-performance I/O capability including 16-bit Hub
Interface 2.0 connection to MCH, and two independent 64-bit PCI/
PCI-X interfaces.
IDE connectors. These dual-channel bus master IDE connectors
support up to four Ultra DMA/100/66, PIO Modes 3 & 4 IDE
devices. Both the primary (blue) and secondary (black) connectors
are slotted to prevent incorrect insertion of the IDE ribbon cable.
Floppy disk connector. This connector accommodates the
provided ribbon cable for the floppy disk drive. One side of the
connector is slotted to prevent incorrect insertion of the floppy disk
cable.
1.4.2 Core specifications
9
8
7
6
5
4
3
2
1