Filter
Top Products
2-24
Chapter 2: Hardware information
13. Internal audio connectors (4-pin AUDIO_COM1, AUDIO_COM2)
These connectors allow you to receive stereo audio input from sound
sources such as a CD-ROM, TV tuner, or MPEG card. The MODEM
connector allows the onboard audio to interface with a voice modem
card with a similar connector. It also allows the sharing of mono_in
(such as a phone) and a mono_out (such as a speaker) between the
audio and a voice modem card.
12. SMBus connector (6-1 pin J16)
This connector allows you to connect SMBus (System Management
Bus) devices. Devices communicate with an SMBus host and/or other
SMBus devices using the SMBus interface. SMBus is a specific
implementation of an I
2
C bus, a multi-device bus that allows multiple
chips to connect to the same bus and enable each one to act as a
master by initiating data transfer.
PP-DLW
PP-DLW SMBus Connector
J16
1
SMBCLK
Ground
SMBDATA
+5V
FLOATING
PP-DLW
PP-DLW Internal Audio Connectors
AUDIO_COM1
(Black)
AUDIO_COM2
(White)
Right Audio Channel
Left Audio Channel
Ground
Ground