4-94-9
4-94-9
4-9
ASUS T2-AE1ASUS T2-AE1
ASUS T2-AE1ASUS T2-AE1
ASUS T2-AE1
Important notes on Serial ATAImportant notes on Serial ATA
Important notes on Serial ATAImportant notes on Serial ATA
Important notes on Serial ATA
• You must install Windows
®
2000 Service Pack 4 or the Windows
®
XP
Service Pack 1 before using Serial ATA hard disk drives.
• When using the connectors in
SS
SS
S
tandard IDE tandard IDE
tandard IDE tandard IDE
tandard IDE mode, connect the
primary (boot) hard disk drive to the SATA1 or SATA2 connector.
Refer to the table below for the recommended SATA hard disk drive
connections.
Serial ATA hard disk drive connectionSerial ATA hard disk drive connection
Serial ATA hard disk drive connectionSerial ATA hard disk drive connection
Serial ATA hard disk drive connection
ConnectorConnector
ConnectorConnector
Connector
ColorColor
ColorColor
Color
SettingSetting
SettingSetting
Setting
UseUse
UseUse
Use
SATA1SATA1
SATA1SATA1
SATA1
BlackBlack
BlackBlack
Black
MasterMaster
MasterMaster
Master
Boot diskBoot disk
Boot diskBoot disk
Boot disk
SATA2SATA2
SATA2SATA2
SATA2
BlackBlack
BlackBlack
Black
SlaveSlave
SlaveSlave
Slave
Data diskData disk
Data diskData disk
Data disk
9.9.
9.9.
9.
Serial ATA connectorsSerial ATA connectors
Serial ATA connectorsSerial ATA connectors
Serial ATA connectors
(7-pin SATA1 [black], SATA2 [black])(7-pin SATA1 [black], SATA2 [black])
(7-pin SATA1 [black], SATA2 [black])(7-pin SATA1 [black], SATA2 [black])
(7-pin SATA1 [black], SATA2 [black])
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
®
SATA connectors
SATA2
SATA1
GND
TXP1
TXN1
GND
RXP1
RXN1
GND
GND
TXP2
TXN2
GND
RXP2
RXN2
GND