Filter
Top Products
5-235-23
5-235-23
5-23
ASUS T2-AE1ASUS T2-AE1
ASUS T2-AE1ASUS T2-AE1
ASUS T2-AE1
The
USB Devices Enabled USB Devices Enabled
USB Devices Enabled USB Devices Enabled
USB Devices Enabled item shows the auto-detected values. If
no USB device is detected, the item shows
NoneNone
NoneNone
None.
USB ConfigurationUSB Configuration
USB ConfigurationUSB Configuration
USB Configuration
The items in this menu allow you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
USB Configuration
USB Devices Enabled: None
Onboard SiS USB1.1 Device [Enabled]
Onboard SiS USB2.0 Device [Enabled]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
Stop EHCI HC in OHCI handover [Enabled]
Enables USB host
controllers.
Onboard SiS USB1.1 Device [Enabled]Onboard SiS USB1.1 Device [Enabled]
Onboard SiS USB1.1 Device [Enabled]Onboard SiS USB1.1 Device [Enabled]
Onboard SiS USB1.1 Device [Enabled]
Allows you to enable or disable the onboard SiS USB 1.1 controller.
Configuration options: [Enabled] [Disabled]
Onboard SiS USB2.0 Device [Enabled]Onboard SiS USB2.0 Device [Enabled]
Onboard SiS USB2.0 Device [Enabled]Onboard SiS USB2.0 Device [Enabled]
Onboard SiS USB2.0 Device [Enabled]
Allows you to enable or disable the onboard SiS USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
Legacy USB Support [Auto]Legacy USB Support [Auto]
Legacy USB Support [Auto]Legacy USB Support [Auto]
Legacy USB Support [Auto]
Allows you to enable or disable support for USB devices on legacy
operating systems (OS). Setting to Auto allows the system to detect the
presence of USB devices at startup. If detected, the USB controller legacy
mode is enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]USB 2.0 Controller Mode [HiSpeed]
USB 2.0 Controller Mode [HiSpeed]USB 2.0 Controller Mode [HiSpeed]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed ]
Stop EHCI HC in OHCI handover [Enabled]Stop EHCI HC in OHCI handover [Enabled]
Stop EHCI HC in OHCI handover [Enabled]Stop EHCI HC in OHCI handover [Enabled]
Stop EHCI HC in OHCI handover [Enabled]
Allows you to enable or disable the enhanced host controller interface
(EHCI) hand-off support. Configuration options: [Disabled] [Enabled]