Filter
Top Products
2-132-13
2-132-13
2-13
ASUS Terminator 1 A7VT400ASUS Terminator 1 A7VT400
ASUS Terminator 1 A7VT400ASUS Terminator 1 A7VT400
ASUS Terminator 1 A7VT400
To install a PCI or AGP card.
1. Place the chassis on its side.
2. Remove the metal bracket
opposite the slot that you wish
to use.
3. Align the card golden fingers
to the slot and its metal
bracket to the slot opening on
the chassis.
4. Press the card firmly until it is
properly seated on the slot.
5. Secure the card to the chassis
with a bracket screw.
PCI slot (PCI1)PCI slot (PCI1)
PCI slot (PCI1)PCI slot (PCI1)
PCI slot (PCI1)
Metal bracketMetal bracket
Metal bracketMetal bracket
Metal bracket
2.8.22.8.2
2.8.22.8.2
2.8.2
Expansion card installationExpansion card installation
Expansion card installationExpansion card installation
Expansion card installation
2.8.32.8.3
2.8.32.8.3
2.8.3
Configuring an expansion cardConfiguring an expansion card
Configuring an expansion cardConfiguring an expansion card
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software
settings.
1. Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2. Install the software drivers for the expansion card.
AGP slot (AGP1)AGP slot (AGP1)
AGP slot (AGP1)AGP slot (AGP1)
AGP slot (AGP1)