Filter
Top Products
2-152-15
2-152-15
2-15
ASUS Terminator 1 A7VT400ASUS Terminator 1 A7VT400
ASUS Terminator 1 A7VT400ASUS Terminator 1 A7VT400
ASUS Terminator 1 A7VT400
2.9 Installing a CD-ROM drive
A CD-ROM drive is an optional item in this barebone system. Refer to the
instructions in this section if you acquired a model without a CD-ROM.
To install a CD-ROM drive:
1. Place the chassis upright.
2. Insert the CD-ROM drive into
the upper 5.25-inch drive bay.
CD-ROM screwsCD-ROM screws
CD-ROM screwsCD-ROM screws
CD-ROM screws
5.25-inch drive bay5.25-inch drive bay
5.25-inch drive bay5.25-inch drive bay
5.25-inch drive bay
3. Carefully push the CD-ROM
drive into the bay until its
screw holes align with the
holes on the bay as shown.
4. Secure the CD-ROM with two
screws on each side of the
bay.