Filter
Top Products
3-29ASUS Pocket Wireless Access Point (WL-330)
Configuration
When using the Alphabet Scan, the AP or wireless device you wish to connect
to must have a disabled WEP encryption and available SSID.
For example, if you have three saved profiles in the profile table, the ASUS
Pocket AP automatically connects to the first profile. Press the reset button
to connect to the second saved profile. Press the reset button again to
connect to the third saved profile.
Specified profile scan (just no. x)- When the reset button is pressed for less than
five seconds, the ASUS Pocket Wireless AP automatically connects to the
specified profile. The saved profiles are numbered from 1 ~ x. You must
select the profile number using the Specified Profile field.
Specified Profile. This field allows you to select a saved wireless network in
the Profile Table. The ASUS Pocket Wireless AP automatically connects to
the selected profile when Scan Mode is set to Specified profile scan.
Click Launch when done. Click Restore to load the default values.
You may also press the reset button of the ASUS Pocket Wireless AP for more
than five seconds to load the default values.