Filter
Top Products
4-4 ASUS Pocket Wireless Access Point (WL-330)
Simple setup
4.4 Connecting to another AP as an adapter
or wireless bridge
Follow these instructions to set your ASUS Pocket Wireless LAN AP as a WLAN
adapter to access another AP with disabled WEP encryption and valid SSID.
1. Switch the device to Ethernet adapter mode using the mode switch. (Default
SSID: ANY in an Infrastructure network)
2. Place the ASUS Pocket Wireless AP nearest the AP you wish to connect,
then turn on the device.
3. Connect one end of the RJ-45 cable to the Ethernet port of the device and
the other end to the Ethernet port of your desktop PC or notebook.
4. Set the IP configuration of the desktop PC or notebook to establish
connection to the local network.
5. Check your connection.
If you failed to connect to an AP, press the reset button of the device to load
the Button Scan mode default settings.