Filter
Top Products
Port Selection
The Master View CS-9134 / CS-9138 provides three methods to obtain instant
access to any computer in your installation: Manual, Hotkey, and OSD.
u
Manual
Simply press the appropriate Port Selection Switch on the Master View’s
front panel. After you press the switch, the Selected LED lights to indicate
that the port has the KVM focus. The OSD (see p. 16) automatically
switches to highlight the computer that you have selected.
Note: 1. On a cascaded installation, you must press the Port Selection
switch on the Master View Station that connects directly to the
computer you want to access.
2. Simultaneously pressing Port Selection buttons 3 and 4
(CS-9134) or 7 and 8 (CS-9138) on the First Stage unit initiates
the Auto Scan feature, in which all the ports currently selected for
Quick View scanning with the OSD’s F4 QV function (see p. 21),
are cycled through. The length of time spent on each port is
determined OSD’s F6 SET function (see p. 22).
u
Hotkey
Hotkeys allow you to conveniently provide KVM focus to a particular
computer from the keyboard, instead of having to manually select it by
pressing a Port Selection switch. To select a port with the Hotkey method,
do the following:
1. Press [Ctrl]+[Shift]+[Alt] to invoke the hotkey function.
2. Key in the Port ID number (see Port ID Numbering on p. 14), then press
[Enter].
Note: 1. Press the keys in sequence - one key at a time. First [Ctrl],
then [Shift], then [Alt].
2. After invoking the hotkey function with the [Ctrl]+[Shift]+[Alt]
combination, you must key in the Port ID and press [Enter]
within 1 second for each keypress.
u
OSD
OSD (On Screen Display), provides a menu driven interface to handle the
computer switching procedure to provide instant access to any computer
on the installation. OSD operation is discussed in detail beginning on p. 16.
2005-12-21
CS-9134 / CS-9138 User Manual 13