ATEN Technology CS-9134 Switch User Manual


 
u
F3 LIST:
This function lets you broaden or narrow the scope of which ports the OSD
lists. On the submenu that appears, an icon of a pointing finger indicates
the currently selected choice. To change a setting, move the highlight bar
to the choice you want, then press [Enter]. An explanation of the settings is
given in the table below:
Choice Meaning
ALL
Lists the Port ID numbers and Names (if names have been specified -
see F5, below), of all the ports on the installation.
QVIEW
Lists only the ports that have been selected for Quick View scanning
(see F4, below).
POWERED ON +
QVIEW
Lists only the ports that have been selected for Quick View scanning
(see F4, below), and that have their attached computers Powered On.
QVIEW + NAME
Lists only the ports that have been selected for Quick View scanning
(see F4, below), and have been assigned names (see F5, below).
NAME
Lists only the ports that have been assigned names (see F5, below).
POWERED ON
Lists only the ports that have their attached systems Powered On.
Note: 1. You can access any port on any list by using the Navigation Keys
then pressing [Enter].
2. If you select a port that does not have a computer attached to it,
or if the attached system is powered Off, the OSD will still switch
to it, and will not show an error.
2005-12-21
20 CS-9134 / CS-9138 User Manual