Filter
Top Products
Monitor Properties 51
Apply your settings
1 Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2 Click OK to save your changes and exit the Catalyst™ Control
Center.
Restore default settings
1 Move the mouse to the bottom right-hand corner of the window.
2 Click Defaults.
Note: Clicking Defaults will restore the defaults for the current view
only. Previous settings are not altered and will be saved once you
click OK.
Discard your settings
•Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Clicking
Discard applies to all features of an aspect, not just the feature in
the current view.
Digital Panel Properties
Use the Digital Panel Properties aspect to configure the DVI settings and Image Scaling to
improve image quality without impacting performance. Use HDTV Support to add EDID
information (containing information about the capabilities of the display) about your connected
HDTV display to the Force button in Displays Manager.
Catalyst™ Control Center loads aspects dynamically based on what device is attached to the
graphics card. If you have standard display device such as a CRT monitor or flat panel display
Monitor Properties will appear instead of Digital Panel Properties. The latter is designed for use
with such devices as HDTV displays.