Filter
Top Products
System Administration
CLOSE WAIT The client has closed its TCP
connection. The MFB’s TCP is waiting for a
close.
FIN WAIT 1 The MFB’s TCP connection is
initiating a close.
CLOSING The MFB’s TCP has notified the
client’s TCP of its intent to close. It is now
awaiting acknowledgment.
LAST ACK The client has closed its TCP
connection. The MFB has closed its TCP
connection and is now awaiting
acknowledgement.
FIN WAIT 2 The MFB’s TCP connection
has initiated a close and is now awaiting
shutdown from the client’s TCP.
TIME WAIT The MFB has closed its TCP
connection and is waiting for retransmission
of the shutdown from the client’s TCP.
UNKNOWN Self-explanatory. Contact the TSC.
Brouter Service State Either in service or busied out
Messages to DEFINITY Read-only. The number of messages sent to the
client in the last message collection period.
Messages from DEFINITY Read-only. The number of messages received from
the client in the last message collection period.
Message Period (minutes) The time period (in seconds) during which messages
are sent and received. This is a per-port number
entered on the Message Collection Period screen.
Use this screen as follows:
To change the port’s service state:
1. Press
Tab
or use the arrow keys to move to the desired port.
2. Press
STATE
to toggle the Service State.
NOTE:
Busying a port out causes that port’s TCP connection (if one exists) to
be closed. No new connections will be permitted on that port until the
port is placed back in service.
Issue 1 January 1996 3-51