Filter
Top Products
Appendix E: Sample Customer Configurations
Example 3. Multiple Secure LANs
DEFINITY LAN
System
Gateway 2
C3
Host name = lgateserver
IP address = 135.20.1.1
Subnet mask = 255.255.255.0
IP address = 135.20.1.200
Subnet mask = 255.255.255.0
C2
Host name = client 3
IP address = 135.20.3.1
Subnet mask = 255.255.255.0
Default gateway = 135.20.1.100
(The route to 135.20.3 network
is 135.20.1.200.)
Default
C1
Host name = client 1
IP address = 135.20.2.1
Subnet mask = 255.255.255.0
Host name = client 2
IP address = 135.20.2.2
Subnet mask = 255.255.255.0
Gateway
IP address = 135.20.1.100
Subnet mask = 255.255.255.0
IP address = 135.20.2.100
Subnet mask = 255.255.255.0
Assembly
IP address = 135.20.3.100
Subnet mask = 255.255.255.0
Gateway
This sample configuration shows the DEFINITY LAN Gateway system assembly
with three different clients on networks physically different from that of the
DEFINITY LAN Gateway system assembly. The default gateway leads to clients
C1 and C2, and gateway 2 leads to client C3. This sample configuration requires
that the DEFINITY LAN Gateway system assembly and the clients be
administered, as follows:
DEFINITY LAN Gateway system assembly:
1. From the Main Menu, choose TCP/IP Administration. Then choose
This Host.
A. Change the host name to a name you have made up
(
lgateserver
in this example).
B. Do the same for the host IP address (
135.20.1.1
in this
example) and, if subnetting is used, the subnet mask
(
255.255.255.0
in this example).
2. From the TCP/IP Administration Main Menu, choose Local Host
Table.
A. Delete the default client.
B. Press
ADD
to access the Add Host screen. Add the host
name and IP address for client 1 (C1).
Issue 1 January 1996 E-5