Filter
Top Products
System Administration
3. The following prompt appears: Are You Sure? (Y/N?) . Type Y and press
Return
. The Port Status/Control screen will reappear, showing the changed
state.
If you type N and press
Return
, the Port Status/Control screen will
immediately reappear.
To close a port’s TCP connection:
1. Press
Tab
or use the arrow keys to move to the desired port.
2. Press
DROP
to close the port’s TCP connection.
NOTE:
New connections are permitted on this port.
3. The following prompt appears: Are You Sure? (Y/N?) . Type Y and press
Return
. The Port Status/Control screen will reappear, showing the change.
If you type N and press
Return
, the Port Status/Control screen will
immediately reappear.
To set the Message Collection Period for a port, select the port and press
MSGPER
.
The Message Collection Period screen will appear. If no ports are administered,
pressing
MSGPER
does nothing.
3-52 Issue 1 January 1996