Filter
Top Products
Appendix A: PBX Carrier
Configuration Worksheets
A
This appendix contains worksheets helpful in installing the DEFINITY LAN
Gateway system. Worksheet A-1 is used to obtain an inventory of your present
circuit pack arrangement in the PBX. Worksheet A-2 is for help in determining
how to rearrange these circuit packs to ‘‘free up’’ five slots for the DEFINITY LAN
Gateway system assembly. Worksheet A-3 is for listing the slots the system
assembly will occupy.
Guidelines for using these worksheets are as follows:
1. Move as few circuit packs as possible.
2. Locate five contiguous slots to the far right (the high port slot numbers), if
possible. Make sure there are at least six slots (control, port, or service)
to the left of the assembly.
3. Don’t use carrier C.
4. There can be only 1 ED-1E546-70 assembly per carrier. If you have the
DEFINITY AUDIX assembly in one carrier, put the DEFINITY LAN
Gateway assembly in another carrier.
Issue 1 January 1996 A-1