Filter
Top Products
Initializing an RPSD Key
Initialization of an RPSD Key involves both the Key and the RPSD Lock. On the Lock,
the Key User ID in question must be added using the Add User command. See Chapter 3,
System Administrator Command Set for the procedure for using the Add User command.
On the Key, the following commands are used for initializing the device:
■
Set User ID
■
Set Secret Key
■
Sets Device Number
■ Date Set
■
Clock Set
■
Set Log ID (optional)
All of these commands must be used when initializing the RPSD Key device. A description of
the commands and the procedures for their use appear in Chapter 4, RPSD Key Use.
Note:
The installer will not have an administration terminal to use for initialization. This must
be supplied by the customer and must be ready for use when initialization takes place.
2-26
Installation