Filter
Top Products
Maintenance and Troubleshooting
continued
Cleaning Components
When the copied documents are hard to read,
clean the machine’s scanning glass and white roller.
If they are dirty, the quality of the transmission
image and copy becomes degraded.
1. Lift the control panel using hand.
2.
Disassemble the white roller. Both ends of the
roller are terminated with bushings which are
snapped shut with small tabs. Push the tabs
slightly inwards in the direction of ‘A’, then rotate
in the direction of
‘8’
until it reaches the slot as
shown in the figure below. Then pull the roller
upwards in the direction ‘C’.
Bushing
with
tabs
Sate
:
Be careful not to lose the bushing on one
md
of the roller when disassembling.
3. Wipe the roller clean with a soft
with alcohol. Then dry throughly.
cloth
dampend
Note
:
Do
not use the document having contents
written by pencil on the back side. It causes the
white roller to be stain. When the roller becomes
dirty, the copied document will not reproduce clear.
4. Clean the scanning glass with alcohol as shown
below.
29