Filter
Top Products
Configuring Backup Interfaces
Issue 5 October 2007 145
To configure a new Backup interface, click Wizard. The Backup Interface Wizard opens. For
information on the Backup Interface Wizard, refer to “The Backup Interface Wizard” on
page 145.
To delete a Backup interface:
1. Select the interface in the table.
2. Click Delete. The interface is marked as deleted in the Backup Interfaces table with the
icon in the leftmost column.
3. Click Apply. The backup interface is deleted.
The following table provides a list of fields in the Backup Interfaces table and their descriptions:
The Backup Interface Wizard
This section provides detailed information on each of the Backup Interface Wizard’s screens. To
continue to the next screen, click Next. To return to an earlier screen, click Back. To exit the
Backup Interface Wizard without making any changes, click Cancel.
The Backup Interface Wizard consists of the following screens:
● Welcome Screen
● Primary Interface Screen
● Backup Interface Screen
● Backup Interface Parameters Screen
● Confirmation Screen
The following sections describe each of the Backup Interface Wizard screens.
Table 53: Backup Interfaces Table Parameters
Field Description
Primary Interface The name of the primary interface being backed up.
Backup Interface The name of the Backup interface.
Failure Delay The amount of time, in seconds, between the trigger event and the
activation of the Backup interface.
Secondary Disable
Delay
The amount of time, in seconds, between the primary interface
returning to an acceptable operational status and the deactivation of
the Backup interface.