Filter
Top Products
Device Configuration
40 Avaya Integrated Management Release 4.0.1 Software Update Manager
For more information on the user interface, refer to “Using Dialog Boxes and Tables” on
page 32.
STP Version Version of Spanning Tree on the device. Possible values are:
● STP Compatible - Standard Spanning-Tree Protocol
● RSTP - Rapid Spanning-Tree Protocol
STP Max Age The maximum amount of time before the Spanning Tree table
recalculates if there is no change in the device status, measured in
milliseconds.
STP Hello Time The amount of time between sending Spanning Tree updates if
there are no detected changes in the device’s network connections,
measured in milliseconds.
STP Forward Delay The amount of time for the device to begin forwarding packets when
first joining a network, measured in milliseconds.
STP Bridge Max Age The maximum amount of time before Spanning recalculates if there
is no change in network bridging status, measured in milliseconds.
STP Bridge Hello
Time
The amount of time between sending Spanning Tree updates if
there are no detected changes in the overall bridged network
topology, measured in milliseconds.
STP Bridge Forward
Delay
The amount of time for the device to begin forwarding packets after
recalculating its Spanning Tree table based on a change in network
topology, measured in milliseconds.
Aging Time (sec) The amount of time MAC addresses remain in the CAM table.
LLDP Mode The status of Link Layer Discovery Protocol (LLDP) Mode on the
device:
● Enable - Use LLDP Mode.
● Disable - Do not use LLDP Mode.
LLDP Tx Interval The amount of time between packet transmissions on the device.
LLDP Tx Hold
Multiplier
The LLDP time-to-live value expressed as a multiple of the value
configured in the LLDP Tx Interval field.
LLDP Tx Delay The delay between successive LLDP frame transmissions initiated
by status changes in LLDP.
LLDP Re-Init Delay The amount of time the device is instructed to wait before
re-initiating LLDP.
Table 9: Device Configuration Fields - Advanced Tab (continued)
Field Description
2 of 2