Filter
Top Products
The Port Mirroring Wizard
Issue 5 October 2007 183
Port Mirroring Wizard - Frames Direction Selection
The Frames Direction Selection screen of the Port Mirroring Wizard enables you to select the
traffic to be copied to the destination port. You can configure the destination port to receive all
traffic going through the source port, or only the traffic received by the source port.
Figure 82: Port Mirroring Wizard - Frames Direction Selection Screen
To configure which frames are copied to the destination port, select an option from the Frames
Direction Mode pull-down list box. Possible options are:
● All Frames - All traffic going through the source port is copied to the destination port.
● Rx Frames Only - Traffic received by the source port is copied to the destination port.
● Tx Frames Only - Traffic transmitted by the source port is copies to the destination port.
When you have finished selecting the traffic to be copied, click Next. The Port Mirroring Wizard
continues with the Port Mirroring Wizard - Confirmation
screen.