Filter
Top Products
IP Route
222 Avaya Integrated Management Release 4.0.1 Software Update Manager
Note:
Note: The list of VLANs allocated in the system is displayed in the
Layer 2 Interface Name field.
Note:
Note: IP Address for unnumbered interfaces or for interfaces receiving their IP address
from a DHCP server or IPCP session cannot be modified.
There are certain constraints when configuring IP static or unnumbered interfaces. After clicking
Apply in the IP Interfaces window, the software checks your configuration and displays error
messages if applicable. The following table lists the possible errors and their descriptions:
Viewing the Dynamic IP Interfaces Table
This table allows configuration of ICMP-redirect only. You cannot add/delete rows in the table.
To display the dynamic IP interfaces:
Select IP Route > Dynamic IP Interfaces. The Dynamic IP Interfaces Table window opens.
Figure 97: Dynamic IP Interfaces Table
Table 71: Error Messages
Error Text Description
The Reference Layer 2 interface cannot be
used because it is configured with IP
unnumbered interface
Reference Layer 2 Interface points to an IP
unnumbered interface.
There is already another IP unnumbered
interface on the layer 2 interface
Layer 2 interface is already configured as an IP
unnumbered interface, and you attempt to
configure Layer 2 interface with a static IP.
There is already another IP static interface
on the layer 2 interface
Layer 2 interface is already configured with a static
IP, and you attempt to configure Layer 2 interface
as an IP unnumbered interface.
There is already another IP unnumbered
interface on the layer 2 interface.
Layer 2 interface is already configured as an IP
unnumbered interface, and you attempt to add an
IP unnumbered interface.
The Reference Layer 2 Interface has no
Valid IP address
Reference Layer 2 interface is not configured, and
you attempt to add an IP unnumbered interface.