Filter
Top Products
WAN Configuration
96 Avaya Integrated Management Release 4.0.1 Software Update Manager
Administrative
Status
The administrative state of the selected port:
● Enable - The port is enabled and can transmit and receive
packets.
● Disable - The port is disabled and cannot transmit or receive
packets.
MAC Address The MAC address of the WAN port.
Operational Status The operational status of the WAN port. Possible values are:
● OK
● Down
● Fatal
Auto Negotiation
Mode
The configured state of the Auto-Negotiation protocol between two
stations. When enabled, Auto-Negotiation detects the highest
common denominator for communication between endstations, and
sets both to the same highest common setting. It also delivers remote
link status.
For 10BaseT and 100BaseT ports, Auto-Negotiation determines the
speed and Duplex Mode of communication between the endstations.
For Gigabit ports, Auto-Negotiation determines the Flow Control
setting of the ports.
Possible values are:
● Enable - Auto-Negotiation is enabled for this interface.
● Disable - Auto-Negotiation is disabled for this interface.
For more information, refer to Auto-Negotiation in The Reference
Guide.
Duplex Mode The state of communication of the selected port. Possible values are:
● Full Duplex - The port can send and receive simultaneously.
● Half Duplex - The port can either receive or send, but cannot
do both simultaneously.
Speed Mode The rate of communication of the selected port. Possible values are:
● Ethernet
● Fast Ethernet
● Gigabit Ethernet
Table 35: Ethernet WAN Port Configuration - General Tab (continued)
Field Description
2 of 3