Filter
Top Products
WAN Configuration
110 Avaya Integrated Management Release 4.0.1 Software Update Manager
Channel Group - Frame Relay Information
The Channel Group dialog box for Channel Groups using frame relay contains five tabs:
● Channel Group - Basic information about the Channel Group. For information on the fields
in the Channel Group tab of the Channel Group - Frame Relay dialog box, refer to
“Channel Group” on page 105
.
● Advanced - Information about the channels that comprise the Channel Group. For
information on the fields in the Advanced tab of the Channel Group - Frame Relay dialog
box, refer to “Advanced” on page 107
.
● Frame Relay - Information about frame relay on the Channel Group.
Operational Status The operational status of the PPP interface. Possible statuses
include:
● Up - The interface is up and can transmit and receive packets.
● Down - The interface is down due to some failure, and cannot
transmit or receive packets.
● Testing - The interface is in testing mode and cannot transmit
or receive regular data.
● Standby - The interface is a backup interface and cannot
transmit or receive packets unless the primary interface it
backs up fails.
● Disabled - The interface is disabled. It cannot transmit or
receive packets.
● Partially Down - The interface is up. However, some
interfaces (or PVCs) layered on top of this interface are Down.
Some packets can be transmitted and received.
IPCP Status IP Control Protocol. The state of IPCP for this PPP session. Possible
statuses include:
● Open - IP packets can be transmitted and received over the
PPP session.
● Not-Opened - IP packets cannot be transmitted and received
over the PPP session.
Backup Interface The interface’s backup status. Possible statuses include:
● Backup By - Interface x - The selected interface is backed
up by interface x.
● Backup Of - Interface x - The selected interface is the
backup interface for interface x.
● N/A - The selected interface is not participating in a backup
scheme.
Table 40: Channel Group Dialog Box - PPP Parameters (continued)
Field Description
2 of 2