Filter
Top Products
WAN Configuration
152 Avaya Integrated Management Release 4.0.1 Software Update Manager
The following table provides a list of the fields in the Dynamic CAC dialog box and their
descriptions.
Table 54: Dynamic CAC Dialog Box
Field Description
Status The status of Dynamic CAC on the WAN interface. Possible values
are:
● Active - Dynamic CAC is active on the WAN interface.
● Not Configured - Dynamic CAC is not configured (but is
supported) for the WAN interface.
● Not Armed - Dynamic CAC is not armed (but is supported
and configured) for the WAN interface.
● Armed Not Configured - Dynamic CAC is armed (and
supported, but not configured) for the WAN interface.
● Not Supported - Dynamic CAC is not supported for the WAN
interface.
Note:
Note: This field is read-only.
RBBL (kbps) Remote Bearer Bandwidth Limit. RBBL is the amount of bandwidth
available for CAC on the remote controller.
Note:
Note: This field is read-only.
Last Update (sec) The last time the CAC values were updated (in seconds).
Note:
Note: This field is read-only.
Interface The local WAN interface supporting Dynamic CAC. Possible values
are:
● Fast Ethernet
● Serial
● Tunnel
CAC BBL (kbps) The local interface bandwidth threshold after which CAC is
activated.
CAC Priority The CAC activation priority.
Status Operational status of Dynamic CAC. Possible values are:
● Not Configured
● Active
● Not Active
● Active ECMP
● Not Supported