Filter
Top Products
Using the BIOS Setup Utility —
CD/DVD
USB FDD
1st Boot Device
2nd Boot Device
3rd Boot Device
HDD
1st Boot Device default is USB FDD.
2nd Boot Device default is CDROM.
3rd Boot Device default is IDE-0.
Disabled S.M.A.R.T. for Hard
Disks
Enabled
Only S.M.A.R.T. Hard Disks are
supported. The default is Disabled.
Disabled
Display Expansion
Support
Enabled
If you are using DOS or a 640 x 480
resolution to run windows, the display
will not fill the entire screen. Enable
this mode to expand the display to the
entire screen. The default is Enabled.
Setup The default value is Setup, which
specifies that a password is only
required to enter the setup utility.
Password Check
Always If Always is selected, the password is
required when the system is booted up
or resuming from a suspend-to-disk.
8MB
16MB
32MB
Share Memory Size
64MB
This field displays the amount of
memory detected by the system during
bootup. It allows you to select shared
memory size for VGA usage. They are
display only fields.