Filter
Top Products
30 AutoView 424 Installer/User Guide
To access the Administrator Scan List menu:
1. Press the Control key twice to access the Administrator Channel List.
2. Press the Control key twice again to access the Command menu.
3. Highlight Setup Scan List and press Enter. The Administrator Scan List
menu appears.
Figure 3.5: Configuring the Scan List
To add a channel to the Scan List:
1. Press the F2 key to open a new selection.
2. Type the address of the channel you want to add to the list. The dwell
time and channel name are updated automatically from the channel
configuration menu.
3. Press Enter to save the new entry.
To delete a channel from the Scan List:
1. Use the Arrow keys to highlight the channel you wish to delete.
2. Press the F3 key.
3. Press Enter to confirm the deletion.
Resetting your Mouse
If your mouse locks up during normal use with the AutoView, you may be
able to re-establish operation by issuing a reset command. The reset command
sends a hot-plug sequence to the server. The hot-plug sequence to a Plug
and Play server causes the mouse settings to be sent to the AutoView. With
communication re-established, functionality is restored to you.