Filter
Top Products
Chapter 5: CPS Appliance Commands 65
Show Server CLI command
The Show Server CLI command displays the serial CLI settings.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER CLI
Mask Subnet mask (from initial configuration or Server Set command).
Gateway Gateway IP address (from initial configuration or Server Set command).
Up Time Days, hours, minutes and seconds since unit was rebooted.
MAC Ethernet MAC address.
S/N Serial number.
Port Port number.
Username Username (from User Add command).
Duration Duration of session.
Socket Telnet socket number.
From Socket Telnet client IP address with socket number in parentheses.
IP Input and Output Network IP statistics, including number of packets delivered, discarded and fragments.
TCP Network TCP statistics, including in segs, out segs, errors and retransmissions.
UDP Network UDP statistics, including in, out, errors and no port events.
BOOT BIOS/Bootstrap version, date and time.
APP Application version that is running, plus its date and time.
Table 5.29: Show Server Command Display Fields (Continued)
Field Content
Table 5.30: Show Server CLI Command Display Fields
Field Contents
CLI Port Serial CLI port number and terminal type.
Access Character Control character used to access CLI.
History
Indicates whether a port’s history buffer content is displayed (auto) or not displayed
(hold) when a user connects to the port, and whether the buffer content is cleared
(clear) or kept (keep) when a session ends.