Filter
Top Products
84 CPS Installer/User Guide
SPCSocketReboot
Command
The Reboot command was issued to an SPC socket.
Variables: command issued by username, server name, SPC location name, CPS
appliance port number and SPC socket number.
SPCSocketOnSense
Failure
An SPC socket encountered an on sense failure.
Variables: server name, SPC location name, CPS appliance port number and SPC
socket number.
SPCSocketOffSense
Failure
An SPC socket encountered an off sense failure.
Variables: server name, SPC location name, CPS appliance port number and SPC
socket number.
SPCTotalLoadHigh
The SPC device has exceeded the total load maximum threshold.
Variables: SPC location name and CPS appliance port number.
SPCTotalLoadLow
The SPC device exceeded the total load minimum load threshold.
Variables: SPC location name and CPS appliance port number.
SPCSocketStatusOn
An SPC socket’s state changed to ‘on.’
Variables: server name, SPC location name, CPS appliance port number and SPC
socket number.
SPCSocketStatusOff
An SPC socket’s state changed to ‘off.’
Variables: server name, SPC location name, CPS appliance port number and SPC
socket number.
userLocked
A user account has been locked.
Variables: client IP address, locked username and reason.
userUnlocked
A user account has been unlocked.
Variables: client IP address, command issued by username, unlocked username
and reason.
aggregatedServer
StatusChg
The status of one or more servers (connections paths) has changed. The appliance
always sends this trap upon bootup. Thereafter, it sends the trap when there is a
change in connection path status, and will include only those paths whose status
has changed.
Variable(s): connection path(s)
Table C.1: CPS Appliance Enterprise Traps (Continued)
Trap Description and Variable(s)