Filter
Top Products
Cyclades-PR2000
27Chapter 4 - Step-by-Step Instructions
Example 2 A LAN-to-LAN Example Using Frame Relay
This section will guide you through a complete router installation for the connection of two LANs via Frame
Relay. Figure 4.9 shows the example system used in this section. Spaces have been provided next to the
parameters needed for the configuration where you can fill in the parameters for your system. Do this now
before continuing.
Central Office's
LAN
200.240.230.2
________
ETH0
SWAN
PR2000
100.130.130.1
________
V.35 DSU/CSU
________
_ _ _ 128 Kbps
Connection
Remote Site’s
LAN
PR2000
200.240.230.1
________
Network IP: 15.0.0.0
_______
Mask :255.255.255.0
________
Network IP: 100.130.130.0
________
Mask: 255.255.255.0
________
Network IP: 200.240.230.0________
Mask :255.255.255.240________
Public
Frame Relay
Network
16
FIGURE 4.9 CENTRAL OFFICE AND REMOTE SITE CONNECTED USING SWAN INTERFACES