Filter
Top Products
52 DSR Installer/User Guide
When a DSR appliance is added to the database with DSAdmin, the
appropriate DSAuth server certificate is added to the DSR automatically. If
DSAuthentication cannot contact the DSR to add the certificate, an error
message is displayed and the DSR is not added to the database.
When the last reference to a DSR is removed from the database, the DSAuth
server certificate is removed from the DSR, which allows the DSR to be moved
from one DSAuth server to another. The DSAuth server certificate can also be
removed from the Security menu on the DSR console port via the Reset
Security Keys option.
When the DSR is in All mode, DSAdmin displays a warning message when the
DSR is added to the database, stating that the certificate could not be installed. If
you intend to operate in All mode, you may safely ignore this warning. Otherwise,
you may wish to change the Security settings on the console port of the DSR.
SNMP Confi guration
This menu option allows you to enable SNMP and to specify parameters for
SNMP operation. The following SNMP parameters may be configured:
• SNMP - Enables or disables SNMP
• Read community name - Specifi es the community from which traps will
be read
• Write community name - Specifi es the community to which traps will
be written
• Trap community name - Indicates the name of the community containing
a trap
• Trap destination address (1-4) - Indicates the addresses of up to four trap
hosts to which you want to send SNMP traps
• Trap confi guration - Displays the SNMP Trap Confi guration menu. You
may select Enable All Traps, Disable All Traps or choose to enable or dis-
able any of the following traps:
Cold Start - No display
Link Down - Displays the index of the Ethernet interface
Link Up - Displays the index of the Ethernet interface
SNMP Authentication Failure - No display
Reboot Started - Displays the username
Video Session Started - Displays the user, port and channel number
Video Session Stopped - Displays the user, port and channel number