Filter
Top Products
14 LongView IP KVM Extender Installer/User Guide
To configure network settings for the transmitter:
1. Activate the serial menu as described in Accessing the serial menu on page 12.
2. Choose option 2 to access the Transmitter Menu and press Enter. If the password option is
enabled, you will be prompted for a password.
3. Type the password and press Enter. The Transmitter Main Menu will appear.
Figure 3.2: Transmitter Main Menu
NOTE: The Reset Appliance option in the Transmitter Main Menu applies only to network settings.
4. Press 1 to select the Network Configuration option and press Enter. The Network
Configuration Menu appears.
5. Press 1 to select the Transmitter Network Config option and press Enter. The Transmitter
Network Configuration Menu will appear.
Figure 3.3: Transmitter Network Configuration Menu
6. Press 1 to select the Transmitter IP Address option and press Enter. Type a valid IP address.
Press
Enter to return to the Transmitter Network Configuration Menu.
7. Configure the network and default network using the same principle.